| Function Group | Function | Description | Series Support |
|---|
| XBMSMP1 Adaptations/Calibrations | Reset DTC/ASC | Reset the adaptation values for the Dynamic Traction Control/Active Stability Control | [F, K, R, S] |
| | Reset knock sensors | Reset the adaptation values for the knock sensors | [S] |
| | Reset mixture | Reset the adaptation values for the fuel mixture and idle forward control | [F, K, R, S] |
| | Reset throttle valve | Reset the adaptation values for the throttle valve sensor | [F, K, R, S] |
| | Reset transmission | Reset the adaptation values for the transmission position sensor | [F, K, R, S] |
| | Reset twistgrip | Reset the adaptation values for the throttle twistgrip sensor | [F, K, R, S] |
| XBMSMP1 Configurations | Switch RPM limit | Enable or disable the controller limit on engine speed | [F, K, R, S] |
| | Switch demo mode | Enable or disable the showroom/demo mode | [F, K, R, S] |
| XBMSMP1 Output Tests | Engine overtemperature light | Turn the engine overtemperature light on/off | [F, K, R, S] |
| | Engine warning light | Turn the engine warning light on/off | [F, K, R, S] |
| | Exhaust flap | Turn the exhaust flap servo on/off (if fitted) | [K, R, S] |
| | Fan | Turn the fan on/off | [F, K, R, S] |
| | Fuel injectors | Turn the fuel injectors on/off | [K, R, S] |
| | Fuel pump | Turn the fuel pump on/off | [F, K, R, S] |
| | Idle actuator | Turn the idle actuator on/off | [F, K, R, S] |
| | Oxygen sensor heating | Turn the oxygen/lambda/O2 sensor heater on/off | [F, K, R, S] |
| | Secondary air valve | Turn the secondary air valve servo on/off | [K, S] |
| | Tank venting valve | Turn the tank venting valve servo on/off | [F, K, R, S] |
| | Throttle valve servo | Turn the throttle valve servo on/off | [F, K, S] |
