Controller Service

BMSK Engine Controller

Function Group Function Description Series Support
BMSK Adaptations Exhaust flap adjustment Perform an adjustment of the exhaust flap servomotor (if fitted) [K, R, S]
Reset adaptations Reset adaptation values [F, K, R, S]
Reset distance to valve check View and reset the distance to next valve clearance check [F, K]
View adaptations View the adaptation values for the gear position sensor after resetting all adaptation values. [R, S]
View adaptations View the adaptation values for the gear position sensor and throttle valve after resetting all adaptation values. [F, K]
BMSK Calibrations Engine synchronization Perform an engine synchronization [R]
Idle actuator calibration Calibrate the idle actuator [F, K, R]
BMSK Configurations ConfigurationCoding options with online backups[F, K, R, S]
Disable Key Disable a key from the known key set [F, K, R, S]
Enable Key Enable a known key with another known key [F, K, R, S]
Switch RPM limit Enable or disable the controller limit on engine speed [S]
View Key Status Read the status of the key in the ignition [F, K, R, S]
BMSK Output Tests DISA Turn the differential air intake on/off [S]
Engine warning light Turn the engine warning light on/off [F, K, R, S]
Fan Turn the fan on/off [F, K, S]
Fuel injector 1 Turn the fuel injector on/off [F, K, R, S]
Fuel injector 2 Turn the fuel injector on/off [F, K, R, S]
Fuel injector 3 Turn the fuel injector on/off [K, S]
Fuel injector 4 Turn the fuel injector on/off [K, S]
Fuel injector 5 Turn the fuel injector on/off [S]
Fuel injector 6 Turn the fuel injector on/off [S]
Fuel injector 7 Turn the fuel injector on/off [S]
Fuel injector 8 Turn the fuel injector on/off [S]
Fuel pump Turn the fuel pump on/off [F, K, R, S]
Idle actuator Turn the idle actuator on/off [F, K]
Idle actuator 1 Turn the idle actuator on/off [R]
Idle actuator 2 Turn the idle actuator on/off [R]
Idle actuator at full load stop Turn the idle actuator on/off [K]
Over-temperature warning light Turn the over-temperature warning light on/off [F, K, R, S]
Oxygen sensor heating 1 Turn the oxygen/lambda/O2 sensor heater on/off [F, K, R, S]
Oxygen sensor heating 2 Turn the oxygen/lambda/O2 sensor heater on/off [R, S]
Secondary air valve Turn the secondary air valve servo on/off [F, K, S]
Tank venting valve Turn the tank venting valve servo on/off [F, K, R, S]